Projektinformationschließen
Projekt
Overmolding of igniter
Projekt
Plastic injection molding tool: contact bridge
Projekt
Plastic injection tool: motor cap
Projektinformation
Overmolding of igniter
Project description:
- 24 cavities (12 cavities per ejector side)
- 6-nozzle hot runner injection
- Tool inserts hardened to 57 HRC
- Tool dimensions: L x W x H 402 × 196 × 446 mm
- Tool weight: nozzle side 110 kg, ejector side 100 kg
- Equipped with pressure sensors
- Operation on vertical injection molding machine with two ejector sides
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Overmolding of igniter
Project description:
- 24 cavities (12 cavities per ejector side)
- 6-nozzle hot runner injection
- Tool inserts hardened to 57 HRC
- Tool dimensions: L x W x H 402 × 196 × 446 mm
- Tool weight: nozzle side 110 kg, ejector side 100 kg
- Equipped with pressure sensors
- Operation on vertical injection molding machine with two ejector sides
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Overmolding of igniter
Project description:
- 24 cavities (12 cavities per ejector side)
- 6-nozzle hot runner injection
- Tool inserts hardened to 57 HRC
- Tool dimensions: L x W x H 402 × 196 × 446 mm
- Tool weight: nozzle side 110 kg, ejector side 100 kg
- Equipped with pressure sensors
- Operation on vertical injection molding machine with two ejector sides
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Overmolding of igniter
Project description:
- 24 cavities (12 cavities per ejector side)
- 6-nozzle hot runner injection
- Tool inserts hardened to 57 HRC
- Tool dimensions: L x W x H 402 × 196 × 446 mm
- Tool weight: nozzle side 110 kg, ejector side 100 kg
- Equipped with pressure sensors
- Operation on vertical injection molding machine with two ejector sides
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection molding tool: contact bridge
Project description:
- PA6 GF40 plastic
- Two tools
- Dual-nozzle hot runner injection
- Hardened and coated tool inserts
- Close-contour cooling and laser-generated components for optimum cycle times
- Tool dimensions: L x W x H 696 × 446 × 620 mm
- Tool weight: 1,150 kg
Project scope:
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection molding tool: contact bridge
Project description:
- PA6 GF40 plastic
- Two tools
- Dual-nozzle hot runner injection
- Hardened and coated tool inserts
- Close-contour cooling and laser-generated components for optimum cycle times
- Tool dimensions: L x W x H 696 × 446 × 620 mm
- Tool weight: 1,150 kg
Project scope:
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection molding tool: contact bridge
Project description:
- PA6 GF40 plastic
- Two tools
- Dual-nozzle hot runner injection
- Hardened and coated tool inserts
- Close-contour cooling and laser-generated components for optimum cycle times
- Tool dimensions: L x W x H 696 × 446 × 620 mm
- Tool weight: 1,150 kg
Project scope:
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection molding tool: contact bridge
Project description:
- PA6 GF40 plastic
- Two tools
- Dual-nozzle hot runner injection
- Hardened and coated tool inserts
- Close-contour cooling and laser-generated components for optimum cycle times
- Tool dimensions: L x W x H 696 × 446 × 620 mm
- Tool weight: 1,150 kg
Project scope:
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection molding tool: contact bridge
Project description:
- PA6 GF40 plastic
- Two tools
- Dual-nozzle hot runner injection
- Hardened and coated tool inserts
- Close-contour cooling and laser-generated components for optimum cycle times
- Tool dimensions: L x W x H 696 × 446 × 620 mm
- Tool weight: 1,150 kg
Project scope:
- Tool concept
- Tool design using SATD
- Tool production
- Dimension and process reconciliation
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection tool: motor cap
Project description:
- PBT GF15 plastic
- Four tools
- Runner system injected using four nozzles
- Coated, hardened tool inserts
- Tool measurements LxWxH: 446 × 396 × 538
- Tool weight: 570 kg
Project scope:
- Tool conception
- Tool design
- Tool production
- Dimension and process coordination
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection tool: motor cap
Project description:
- PBT GF15 plastic
- Four tools
- Runner system injected using four nozzles
- Coated, hardened tool inserts
- Tool measurements LxWxH: 446 × 396 × 538
- Tool weight: 570 kg
Project scope:
- Tool conception
- Tool design
- Tool production
- Dimension and process coordination
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection tool: motor cap
Project description:
- PBT GF15 plastic
- Four tools
- Runner system injected using four nozzles
- Coated, hardened tool inserts
- Tool measurements LxWxH: 446 × 396 × 538
- Tool weight: 570 kg
Project scope:
- Tool conception
- Tool design
- Tool production
- Dimension and process coordination
- Mass production support (repairs and maintenance)
Projektinformation
Plastic injection tool: motor cap
Project description:
- PBT GF15 plastic
- Four tools
- Runner system injected using four nozzles
- Coated, hardened tool inserts
- Tool measurements LxWxH: 446 × 396 × 538
- Tool weight: 570 kg
Project scope:
- Tool conception
- Tool design
- Tool production
- Dimension and process coordination
- Mass production support (repairs and maintenance)
Werkzeug- und Anlagenbau / Kunststoff-Spritzgusswerkzeuge
Kunststoff-Spritzgusswerkzeuge
Präzisionsteile aus thermoplastischen Kunststoffen sind ein wesentlicher Bestandteil moderner und wirtschaftlicher Produktentwicklung. Grundlage hierfür sind Kunststoff-Spritzgusswerkzeuge, die höchsten Ansprüchen an Qualität gerecht werden.
Flexibilität für Vielfalt — unser Leistungsspektrum bei Kunststoff-Spritzgusswerkzeugen reicht von der Entwicklung einzelner Teile bis zur Realisierung komplexer Baugruppen. Dabei werden unsere 1K und 2K Werkzeuge exakt auf Ihre Bedürfnisse zugeschnitten. Durch individuelle Auswerferkonzepte und den Einsatz optimierter Temperierungsverfahren erhalten Sie qualitativ hochwertige Bauteile in kürzesten Zykluszeiten.
Mit unseren innovativen Ideen und Weiterentwicklungen von gängigen Standards schaffen unsere Werkzeuge wirtschaftliche Produktionsbedingungen von Serienbauteilen.
Ihre Vorteile auf einen Blick:
- Kurze Zykluszeiten
- Maximale Standzeiten
- Spezifische Werkzeuge für spezielle Aufgaben
- Geringe spezifische Werkzeugkosten ("tooling cost per piece")